Quick Start Instructions

QUICKSTART CHECKLIST
NOTE: For first time users, we recommend you read the First Time User’s Guide included with your kit for a more detailed explanation.
  • Ensure all devices are powered off
  • Turn D-Link on
  • In iPad Settings>Wifi wait for SpeedLAN_X (Or maybe SpeedLAN_RED with older systems)
  • When visible connect to SpeedLAN_X
    • If asked, the password is ‘speedlight’
  • Turn on SpeedLink (Wait for one minute)
  • Open SpeedLight App on your iPad
  • Go to ‘Setup & Connection’ page
    • If you get a ‘No IP’ error start again
  • Select a preset test & turn gates on
    • Drag and drop gates in appropriate locations
  • Go to ‘Run Test’ page
  • Arm System
HAVING PROBLEMS?
 
  1. Ensure your SpeedLink is placed in an elevated position
    i.e. put the SpeedLink on top of the SpeedLight carry case, a table, etc.
    NEVER PUT THE SPEEDLINK ON THE GROUND
     
  2. Keep the D-Link at least 40cm (16”) away from the SpeedLink
     
  3. Make sure all antennas are pointing upwards
    This includes Gates, SpeedLinks, SpeedStarts, and SpeedReaders
     
  4. Are your antenna connectors loose?
    A loose antenna fitting can result in internal damage that will limit the range of your devices significantly and causes slowing of system response.

Add Feedback